-High Flow Filter Cartridge_Water Filter Cartridge

Introduction

High flow filter cartridge is a kind of water filter cartridge with high quality glass fiber or polypropylene filter media. It has high particle removal efficiency and broad chemical compatibility than a standard micron filter cartridge. High flow filter cartridge features inside-to-outside flow to keep unwanted particulate trapped within filter. External netting adds extra support and built-in handle makes water filter cartridge change out fast, easy and safe. Thermal bonding of high flow sediment filters guarantees the integrity and eliminates glues or adhesives additives.

Features

1. High contaminant holding capacity for long life.
2. All materials of construction are FDA listed.
3. Fewer cartridges for fewer change-outs, thus less labor and disposal cost.
4. Thermally bonded ensure structure integrity and no additives
5. Heavy wall core offers superior strength.
6. Integrated handle makes change out fast, easy and safe.
7. Inside-to-outside flow traps particulate within filter.
8. External netting for additional support.
9. Compatible with most brand standard high flow filter housings.

Structure & Drawing

Application

Reverse Osmosis pre-filtration
Power plant cold condensate filtration
Chemical industry
Petrochemicals
Food & Beverage
Oil & Gas
Industrial water treatment

Product Range

P-all High Flow Filter Cartridge

Filter Media:

Polypropylene(PP), Glass Fiber.

Length:

20"(508mm), 40"(1016mm), 60"(1524mm)

Outside Diameter:

6" (152mm)

Filtration Direction:

From inside to outside

Filtration Rating:

1μm, 2μm, 3μm, 5μm, 10μm, 20μm, 40μm, 70μm, 100μm

Support Core:

Polypropylene (PP)

End Cap Material:

Glass fiber reinforced Polypropylene (PP)

Outside:

Rigid Hard Cage, Belt, Stainless Steel(special)

Seal Material:

EPDM, Buna-N,Viton

Max. Operating Temp:

Pleated glass fiber:121°C, Pleated PP:82°C, Melt Blown PP: 65°C

Max. Differential Pressure:

Pleated glass fiber:3.4 Bar at 121°C, Pleated PP:3.4 Bar at 82°C, Melt Blown:1.03 Bar at 65°C

Recommended Change out Differential Pressure:

2.5 Bar at 20°C

P-arker High Flow Filter Cartridge

Filter Media:

Polypropylene(PP).

Length:

20"(508mm), 40"(1016mm), 60"(1524mm)

Outside Diameter:

6" (152mm)

Inside Diameter:

3.5"(89mm)

Filtration Rating:

1μm,2μm,3μm,5μm,10μm,20μm,40μm,70μm, 100μm

Support / Drainage:

Polypropylene (PP)

End Cap Material:

Glass fiber reinforced Polypropylene (PP)

Outside:

Netting, Cage

Seal Material:

EPDM, Buna-N,Viton

Max. Operating Temp:

82°C

Max. Differential Pressure:

3.4 Bar at 82°C

Suggested Max. Flow Rate:

20"(508mm) - 30m³/h 40"(1016mm) - 50m³/h 60"(1524mm) - 70m³/h

3-M High Flow Filter Cartridge

Filter Media:

Polypropylene(PP)

Support / Drainage:

Polypropylene (PP)

End Cap Material:

Glass fiber reinforced Polypropylene (PP)

Seal Material:

EPDM, Buna-N, Silicone

Length:

20"(508mm), 40"(1016mm), 60"(1524mm)

Outside Diameter:

6.5" (165mm)

Inside Diameter:

3"(76.2mm)

Filtration Rating:

1μm,3μm,5μm,10μm,20μm,50μm,70μm,100μm

Max. Operating Temp:

EPDM, Buna-N,Viton

Max. Operating Temp:

80°C

Recommend DP for change-out:

2.1-2.4 bar

Filtration Area:

18㎡ at 60", 12㎡ at 40"

P-entair High Flow Filter Cartridge

Filter Media:

Polypropylene(PP)

Length:

40"(1016mm), 60"(1524mm)

Outside Diameter:

6.75" (171mm)

Inside Diameter:

71.5mm

Filtration Rating:

1μm,5μm,10μm,15μm,20μm,50μm,70μm,100μm

Support Layer:

Polypropylene(PP)

End Cap Material:

Nylon

Seal Material:

Buna-N

Max. Operating Temp:

82°C

Working Pressure Difference:

0.38 Mpa at 21°C, 0.15 Mpa at 82°C

Recommended Change out Differential Pressure:

2.4 Bar at 20°C

Date Sheets

P-all High Flow Filter Cartridge
Filter Media	Polypropylene(PP), Glass Fiber
Length	20"(508mm), 40"(1016mm), 60"(1524mm)
Outside Diameter	6"(152mm)
Filtration Direction	From inside to outside
Filtration Rating	1μm, 2μm, 3μm, 5μm, 10μm, 20μm, 40μm, 70μm, 100μm
Support Core	Polypropylene (PP)
End Cap Material	Glass fiber reinforced Polypropylene (PP)
Outside	Rigid Hard Cage, Belt, Stainless Steel(special)
Seal Material	EPDM, Buna-N,Viton
Max. Operating Temp.	Pleated glass fiber:121°C, Pleated PP:82°C, Melt Blown PP: 65°C
Max. Differential Pressure	Pleated glass fiber:3.4 Bar at 121°C, Pleated PP:3.4 Bar at 82°C, Melt Blown:1.03 Bar at 65°C
Recommended Change out Differential Pressure	2.5 Bar at 20°C

HIGH FLOW FILTER CARTRIDGE

LET'S GET IN TOUCH